Modify Selection
- Hazard prevention and control:
- Span design
- or
- Pressure arch design
- or
- Entry design
- or
- Roof beam design
- or
- Skin control
- or
- Slope design
- or
- Highwall design
- or
- Pillar design
- or
- Support design and selection
- Document types:
- Conference papers
Home Links
Results 71 - 77 of 77
-
1/1/1999 - Conference papersThis paper examines current design practices for stone mines and discusses issues for safe mine layouts so that a rational first approach towards balancing the demands for increased production can be weighed against increased risk to worker safety.
-
1/1/1999 - Conference papersA study on the mechanics of strata behavior determined through extensive field measurements. Practical techniques for assessing roof behavior were developed along with a prototype remote controlled roof support system.
-
11/1/1998 - Conference papersTo provide a better understanding of the mechanics of strata deformation, the authors have collected and reviewed measurements of convergence and stress in one western U.S. mine and have completed modeling for two typical pillar-pulling plans.
-
8/1/1998 - Conference papersThis paper presents the results of a case study conducted in a two-entry gateroad in a coal mine where excessive roof deformation and bolt loading resulted in failure of many roof supports.
-
8/1/1997 - Conference papersDemonstration of a technique developed at the Spokane Research Center that allows the user to create a finite-element model of a two-dimensional section of an underground mine in a relatively straightforward manner.
-
8/1/1997 - Conference papersA method to assist in the evaluation and selection of roof bolts using in situ measurements of roof bolt loading has been developed by researchers of the Spokane Research Center, National Institute for Occupational Safety and Health.
-
1/1/1990 - Conference papersThis U.S. Bureau of Mines paper discusses the importance of an interface slip mechanism between the coalbed and the surrounding strata in controlling the extent and pattern of stresses and deformations in a coal pillar.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program